Ads go here

Turnout Suspenders

All suspenders below are available with optional reflective trim in red/orange, lime/yellow or silver Scotchlite™, except for the Padded H-Back Ripcord Suspenders, which are available with red/orange or lime/yellow reflective triple trim only.

 

h-back suspendersH-BACK SUSPENDERS (For use with RS-1™, 6" and 3" bib models and AEGIS™ )
Four button attachments are on the front, 2 on the back. Left and right halves are joined by a 10" long, 2" wide horizontal elasticized webbing on the mid back, forming an “H." On the front, a hi-temp thermoplastic loop is attached to strap ends. Straps are 2" wide elasticized webbing, threaded through and folded over the thermoplastic loops. Strap ends are finished with leather suspender button attachments for comfortable 4-way front suspension. Adjust length easily with hi-temp thermoplastic slides. (Red only, available in Short, Regular and Long sizes.)

 

 

 

 

 

 

 

 

Padded ripcord H-back suspendersPADDED RIPCORD H-BACK SUSPENDERS (For use with REAXTION™, RSX™, and  IH™ Series I and Series II Pants)
Suspenders attach to horizontal loops sewn to the top of the waistband and attach with snaps. H-Back design stays on your shoulder; ripcord hardware allows easy adjustment and quick release. (Black only, available in X-Short, Short, Regular and Long sizes.)

 

 

 

 

 

 

 

 

 

 

 

super duty suspendersSUPER DUTY SUSPENDERS (For use with RS-1™ no-bib models and Aegis™ no-bib models)
These feature a traditional 8-point design: 4 suspender button attachments front, 4 back. Left and right straps join together at the back, attaching to a hi-temp thermoplastic loop, with a 2" X 9" elasticized strap threaded through and over the loop. A secure 4-point attachment at the back is achieved by a 2-point leather suspender button harness attached to each end of the elasticized strap. On the front, a hi-temp thermoplastic loop is attached to suspender strap ends. 9" straps and 2" wide elasticized webbing are threaded through and folded over the thermoplastic loops. Strap ends are finished with leather suspender button attachments for a 4-way front suspension. Length adjusts easily with hi-temp thermoplastic slides. (Red only, available in Short, Regular and Long sizes.)

 

 

 

 

 

 

 

hiback ripcord suspendersH-BACK RIPCORD SUSPENDERS (For use with RS-1™, 6" and 3" bib models and AEGIS™)
Quality and construction are identical to above, but these are equipped with a specially configured metal slide that adjusts suspenders easily with a quick pull of the ripcord. Tension releases by lifting front tab on metal slide. (Red only, available in Short, Regular and Long sizes.)

 

 

 

 

 

 

 

 

REMOVABLE SHOULDER PADS
We designed them for use with suspenders, but they're ideal for any 2" strap need, including gear bags. The pads are approximately 12 1/2" x 5 1/2", but fold over to 2" when attached to a suspender strap. Quilt-stitched padding cushions strap against the shoulders. Full length 2" hook and loop spans full length of the pads, securing them in place. (Black only, one size fits all.)

 

  • PPE Tracker
twitter