Aegis™ Jacket Features and Benefits 
- YOCCO™ Drag Rescue Device (DRD)
- 2-Piece/4-Layer Collar Throat Tab
- Patented Collar Break™ Attachment System
- Contoured Sleeves
- Expansion-Plus Sleeve
- Telescoping Sleeve Wells
- Patented TRIMTRAX™ Thread Protection
- Thermally Enhanced Upper Body and Elbows
- Cargo/Handwarmer Dual Action Pockets
- Low-Bulk Front Closure System
- Heavy-Duty Cuff Reinforcement
- Reinforced Hardware
- Generous Liner Pocket
- Double-Stitched Seams
- Reflective Trim and Lettering
- Shorter Jacket/Active Fit
- YOCCO™ Drag Rescue Device (DRD)
Contoured and graded for each coat size, the Cairns collar combines the most comfortable fit available and the advantages of CollarBreak™ with no irritating hook and loop or snaps at the neckline. 5-ply construction combines 2 layers of outer shell with 3 layers of moisture barrier. 3 rows of horizontal stitching on the underside shell layer provide improved stand-up performance. 4-layer throat tab provides no-gap protection, sheds sparks and spray, and affords precision SCBA mask interface. 
1A. Patented CollarBreak™ Attachment System
Uniquely comfortable and efficient, this design easily met the current NFPA 1971 shower test without modification. Full wrap-around collar is sewn directly to the liner. The coat shell has a stand-up annular interface that attaches inside the back of the collar, creating a smooth, hidden and secure connection. Also provides instant fire ground identification that the liner is in place; if the collar is missing, the thermal liner is not installed.
2. Contoured Sleeves
Our sleeves are cut and sewn to match the ergonomic shape of your arm to work with you - not against you. Contoured and graded for each coat size so you always get a comfortable fit in all positions.
2A. Expansion Plus Sleeve (Patented)
Another Cairns exclusive. Pleated darts built into all three layers on the front and back of each sleeve provide unprecedented mobility. Raise your arms up, down or rotate them around - minimal coat rise. Added Benefit: Works to reduce fatigue even with SCBA in place.
3. Telescoping Sleeve Wells
Extra-deep 5" telescoping sleeve wells keep water out, interface with all glove styles, and increase mobility when reaching. 4" NOMEX® wristers are standard, or choose from many available options including hand/wrist guards and elasticized sleeve wells.
4. TRIMTRAX™ Thread Protection (Patented)
Our patented system of abrasion resistant KEVLAR® cording protects the thread securing our reflective trim from abrasion. Lasts longer than conventional trim stitching so maintenance costs are lower and your gear is in service more often.
5. Cargo/Handwarmer Dual Action Pockets
Standard 9" x 9" pleated expansion cargo pockets have an extra layer of shell fabric to reinforce the lower half for longer wear. Comfortable handwarmer pockets are set underneath. Full expansion, half expansion and wedge style pockets are also available options.
6. Thermally Enhanced Upper Body & Elbows
High compression areas get added layers of your specified thermal liner material for greater Conductive and Compressive Heat Resistance (CCHR). Extra-large enhancements extend 7" down the back and 5" down the front.
7. Low-Bulk Front Closure System
Heavy-duty brass zipper and quadruple-stitched hook and loop fastener create a secure and low-bulk closure.
Storm flap and inside facings are lined with breathable moisture barrier material for improved ventilation of critical body core.
8. Heavy-Duty Cuff Reinforcement
Extra-wide premium pearl gray leather, double-stitched for extended wear, is standard or your choice of optional reinforcement materials.
9. Reinforced Hardware
All hook and dees and suspender buttons are reinforced with precision die-cut leather. Reinforcement is centered to ensure that the hardware never misses the intended application point.
10. Generous Liner Pocket
7" x 9" interior pocket is lined with moisture barrier to keep contents dry. Optional second interior liner pocket is available.
11. Double-Stitched Seams
The strongest stitching in the industry with double-needle seams and 8 to 10 stitches per inch for longer service life.
12. Reflective Trim and Lettering
We offer a wide choice of trim styles and materials to meet your visibility and identification needs.
13. Shorter Jacket/Active Fit
Shorter 29" back length and tailored 5-panel body combine for less bulk and maximum mobility.
14. YOCCO™ Drag Rescue Device(DRD) (Patented)
The YOCCO™ Drag Rescue Device is designed to provide a quickly deployed system to help rescue a downed firefighter. The DRD strap is hidden between the inner and outer jacket and loops around the upper shoulders. One end of the loop exits through an opening in the outer jacket at the base of the collar covered by a flap. To deploy, open the flap and pull on the strap handle. This action tightens the loop around the victim's torso and gives you and others a more effective way of dragging a firefighter to safety.
